ACROMAG Industrial Partner

AVME9470 - Acromag AVME9470 Input/Output VMEBus CPU Board | With 80 Channels,...

larger image

Request Quote
For Price
Part Number:
AVME9470
Model Number:
AVME9470
Make:
ACROMAG
Lead Time:
Available
Qty In Stock:
Available

Acromag AVME9470 Input/Output VMEBus CPU Board | With 80 Channels, Front cable access Simple Type: I/O Controller

The AVME9470 board offers a variety of features to simplify complex industrial control applications. It can perform up to four independent functions at the same time to replace four other boards and save three card cage slots. This is possible because the I/O are divided into four individually configurable sections. Functions for each section are field-selectable with a choice of up to five I/O modes including Debounce, Interrupts, handshaking or general purpose I/O.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 16 points bidirectional I/O also usable as 4 handshaking ports or 4 counter/timers
  • 64 points bidirectional I/O also usable as 32 bidirectional I/O with 8 counter/timers
  • Change-of-state monitor with vectored interrupts: Change in signal from high to low; Change in signal from low to high; Matching an 8-bit word; Any value change
  • Four handshaking modes
  • Programmable debounce delays on 64 I/O points
  • TTL and CMOS compatible
  • Twelve 16-bit counter/timers

Specifications

    General
  • Counter/timer input: up to 3.3MHz with 170nS minimum pulse width
  • Counter/timer output: Square wave from 15.26 Hz to 100KHz; One-shot pulse width from 500nS to 32mS, retriggerable or nonretriggerable under program control
  • Front panel: four 50-contact connectors
  • Humidity: 5 to 95%, non-condensing
  • Input current: 20uA @ 5V DC (pull-up resistors removed)
  • Input debounce: programmable for no debounce or 3µS minimum to 0.2S maximum
  • Input threshold (H to L): 0.8V DC nominal
  • Input threshold (L to H): 2.0V DC nominal
  • Input voltage range: 0 to 5V DC
  • Isolation: Non-isolated
  • Operating Temperature: 0 to 70°C (32 to 158°F)
  • Output current sink: IOL - 100mA, maximum (8-bit ports); IOL - 60mA, maximum (4-bit port)
  • Output saturation voltage @ 100mA: 0.6V maximum, 0.4V typical
  • Output type: open collector with pull-up resistor
  • Output voltage range: 0 to 5V DC
  • Points per board: (each point configurable as an input and/or output)80
  • Power Supply Requirements: +5V DC ±5% @ 3.0 A, maximum
  • Storage Temperature: -25 to 85°C (-13 to 185°F)
  • VMEbus, P2: 603-2-IEC-C096-F

 

Applications

  • None Available

Aliases

  • None Available