250T-FQ1-DIN-DT1 - Acromag 250T-FQ1-DIN-DT1 Transmitters - 250T: Loop-powered Transmitter series, 0 to...
- Part Number:
- 250T-FQ1-DIN-DT1
- Model Number:
- 250T-FQ1-DIN-DT1
- Make:
- ACROMAG
- Lead Time:
- Available
- Qty In Stock:
- Available
Acromag 250T-FQ1-DIN-DT1 Transmitters - 250T: Loop-powered Transmitter series, 0 to 25.6KHz frequency input range; DIN rail G or T mount; CSA approval, Div. 2 hazardous locations Simple Type: Transmitter
These transmitters accept periodic or pulse waveform signals such as those originating from tachometers, magnetic transducers, and turbine flow meters, and provide a proportional process current or voltage output signal.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1500V AC peak isolation (250V AC or 354VDC continuous) prevents ground loops.
- 90% span adjustment enables precise application calibration.
- Excellent accuracy and stability ensure reliable measurements in harsh industrial environments.
- Excitation/pull-up circuit adds flexibility
- Field-selectable time constants optimize output response time and ripple characteristics
- Quartz crystal time-base design improves temperature performance
- RFI and EMI resistance minimize the effects of environmental noise.
- Selectable threshold circuits accept unipolar/bipolar inputs (0V bipolar, 1.5V unipolar)
Specifications
- Accuracy: ±0.1% of calibrated span. Includes repeatability, hysteresis, terminal point linearity, and adjustment resolution.
- Ambient Temperature Effect: Less than ±0.01% of output span per °F (±0.018% per°C). (Specification includes the combined effects of zero and span over temperature).
- Ambient Temperature Range: Operating: -13 to 185°F (-25 to 85°C) | Storage: -40 to 185°F (-40 to 85°C).
- Input Ranges: Frequency, span ranges 0 to 25.6KHz, field-selectable, direct coupled inputs, ±25mV to 150V RMS
- Noise Rejection: Common Mode: 115dB at 60Hz, 100 ohm unbalance | Normal Mode: Not applicable.
- Noise Resistance: RFI: Less than ±0.5% ,of output span effect | EMI: Less than ±0.25% of output span effect.
- Output Ranges: DC current: 4 to 20mA | DC voltage: 0 to 5V or 0 to 10V
- Power Requirements: 12 to 50V DC @ 20mA (loop-powered)
Applications
- None Available
Aliases
- None Available
